Warm Floor Store
Ultra Tile ProLevel One Deep Fill Self Levelling Compound 20kg
Ultra Tile ProLevel One Deep Fill Self Levelling Compound 20kg
FREE UK Delivery On orders over £250net*
Need some help? Call us on 01604 815711

Ultra Tile ProLevel One Deep Fill Self Levelling Compound 20kg

Internal Use

3 - 60mm Depth

3 Hours Set Time

Tile After 8 Hours

20kg: 3.4L mixing ratio

Conforms To CT C35 F6 EN 13813 Classification

Size: 20kg Bag

Flexible Properties For Use With Underfloor Heating Systems

Product Code Price Quantity
UTF PROLEVEL ONE 20

£15.59 INC VAT

£12.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Warm Floor Store Ltd can't be held responsible for any under ordering.

Description

UltraTileFix ProLevel One is a single-part, high-strength, rapid drying and curing cementitious smoothing and levelling compound. The product's formulation incorporates a blend of specially graded fillers, cements and polymers with a rapid curing profile to enable early fixing of tiles even at thicker depth applications. It provides a strong, sound, even base which creates an ideal substrate for the fixing of small or large tiles, allowing the tiling process to begin after only 8 hours. Its fast set time (in good ambient conditions) enables light foot traffic in 3 hours.

All subfloors should be protected from moisture from the sub-ground by use of a base damp proof membrane (DPM) (please check older properties, which may not have a base DPM). Assess moisture levels in accordance with BS 8203, to achieve a hygrometer reading of 75%RH or less. Where this is not attained a surface DPM should be used – the selection of which will be subject to the subfloor. Any surface laitance, adhesive residue, paints, weak smoothing underlayments and any other materials which will hinder UltraTileFix ProLevel One's bond with the subfloor should be mechanically removed. The subfloor should be clean, dry and sound. The area should also be dust-free prior to any primer application.

Suitable for use on:
Concrete subfloors.
Tamped or pan-floated concrete.
Sand/Cement screeds.
Existing smoothing underlayments.
Terrazzo/Granolithic ceramic tiles.
Anhydrite/Calcium Sulphate/Gypsum-based screeds.
Tile Backer boards.
Warm water underfloor heating.
Radiant electrical underfloor heating system.
UltraFloor DPM IT.

Attachments
ProLevel-One-Deepfill Data Sheet.pdf
ProLevel-One-Deepfill Safety Sheet.pdf
ProLevel-One-Certificate.pdf
Specification

Classification: CT-C35-F6.
Depth: 3-60mm.
Working time at 20°C: *20-30 Minutes.
Walk on hardness time at 20°C: *3 Hours (3mm application).
Commence the tiling process:
- *8 Hours (3mm application).
- *24 Hours (5-15mm application).
- *48 Hours (15-30mm application.
- *72 Hours (30-50mm application).
For depths above 50mm leave 7 days before commencing the tiling process.  
(*Depending on substrate porosity, nature of flooring and notes in Curing & Drying above.).
Compressive Strength (N/mm²): 28 Days: 35.0 (to BS EN 13892-2).
Flexural Strength (N/mm²): 28 Day: 6 (to BS EN 13892-2).
Coverage:
- 4.0m² per 20kg bag @ 3mm depth.
- 2.4m² per 20kg bag @ 5mm depth.
- 1.2m² per 20kg bag @ 10mm depth.
- 0.8m² per 20kg bag @ 15mm depth.