by Ultra Tile
Internal Use
Formulated With FibreBond Technology
3 - 75mm Depth
3 Hours Set Time
Tile After 8 Hours
20kg: 3.4L Mixing Ratio
Conforms To CT C35 F6 EN 13813 Classification
Bag Size: 20kg
| Product Code | Price | Quantity |
|---|---|---|
| UTF PLEVEL FIBRE 20 |
£16.20 INC VAT £13.50 EX VAT |
|
UltraTileFix ProLevel Fibre is a single-part, high-strength, rapid drying and curing concrete floor leveller. The product's formulation incorporates a blend of specially graded fillers, cements, polymers and fibres. It is mixed with clean cold water to give a free-flowing product that can be applied from 3-75mm in one application. Our specifically formulated fibre technology aids application and strength resulting in a strong, sound and even base ready to commence the tiling process after only 8 hours. Its fast set time (in good ambient conditions) enables light foot traffic in 3 hours.
All subfloors should be protected from moisture from the sub-ground by use of a base damp proof membrane (DPM) (please check older properties, which may not have a base DPM). Assess moisture levels in accordance with BS 8203, to achieve a hygrometer reading of 75%RH or less. Where this is not attained a surface DPM should be used – the selection of which will be subject to the subfloor. Any surface laitance, adhesive residue, paints, weak smoothing underlayments and any other materials which will hinder UltraTileFix ProLevel Fibre's bond with the subfloor should be mechanically removed. The subfloor should be clean, dry and sound. The area should also be dust-free prior to any primer application.
Suitable for use on:
Concrete subfloors.
Tamped or pan-floated concrete.
Sand/Cement screeds.
Existing smoothing underlayments.
Terrazzo/Granolithic ceramic tiles.
Anhydrite/Calcium Sulphate/Gypsum-based screeds.
Tile Backer boards.
Warm water underfloor heating.
Radiant electrical underfloor heating system.
UltraFloor DPM IT.
Classification: CT-C35-F6
Depth: 3-75mm
Working time at 20°C: *20-30 Minutes
Walk on hardness time at 20°C:*3 Hours (3mm application)
Coverage:
4.0m² per 20kg bag @ 3mm depth
2.4m² per 20kg bag @ 5mm depth
1.2m² per 20kg bag @ 10mm depth
0.8m² per 20kg bag @ 15mm depth
Commence the tiling process:
*8 Hours (3mm application)
*24 Hours (5-15mm application)
*48 Hours (15-30mm application)
*72 Hours (30-50mm application)
For depths above 50mm leave 7 days
before commencing the tiling process.
(*Depending on substrate porosity, nature of flooring and notes in Curing & Drying above.)
Compressive Strength (N/mm²): 28 Days: 35.0 (to BS EN 13892-2)
Flexural Strength (N/mm²): 28 Day: 6 (to BS EN 13892-2)
