Laticrete 335 Maxi S Multi-Purpose S1 Cement Based Adhesive White 20kg

Order in the next {{data.days}} day, {{data.hours}} hour, {{data.minutes}} minute and {{data.seconds}} second Last chance for {{data.day}} delivery*

FREE UK Delivery On orders over £250net*

Need some help? Call us on 01604 815711

Laticrete 335 Maxi S Multi-Purpose S1 Cement Based Adhesive White 20kg

Highly Flexible, Multi-Purpose, Deformable Adhesive

Low Dust

Suitable For Interior & Exterior Use

For Thickness Up To 20mm

Colour: White

Coverage: 3,5 – 6m² / 25kg

Size: 20kg Bag

Product Code	Price	Quantity
24-0335-E-0025-22-1-M	£13.19 INC VAT £10.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Warm Floor Store Ltd can't be held responsible for any under ordering.

Description

335 MAXI S is a highly flexible, multi-purpose, deformable adhesive with low dust and variable mix ratios, designed for rapid installation of ceramic, porcelain, and glass tile and stone. It can be mixed as a thixotropic or flow-bed adhesive and is ideal for large format tiles and great for vertical applications.

USES:
• For thickness up to 20mm.
• For interior and exterior installations of ceramic, porcelain, and glass tile and non-moisture sensitive stone.
• For walls or floors.
• Over existing wall and floor tiles.
• For heavy traffic areas.
• Good for installation of large format tiles.
• Ideal for heated screeds.
• Can be mixed as a thixotropic or flow-bed adhesive.

ADVANTAGES:
• Single component — just add water.
• Low dust and low VOC — safer and better for you.
• Thixotropic and deformable — easy to use with excellent workability.
• Minimal sag — good for vertical applications.
• Long open time.
• Frost resistant.
• Good compression strength.

SUITABLE SUBSTRATES:
• Concrete.
• Concrete Block.
• Cement Mortar Beds and Screeds.
• Cement Plaster/Render.
• Existing Ceramic Tile and Stone (Interior Only).
• Cement Backer Board (Interior Only).
• Gypsum Wallboard (Interior use only, non-wet areas).
• Gypsum Underlayments (Interior Only).

Attachments

Laticrete 335 MAXI S Technical Data Sheet.pdf
Laticrete 335 MAXI S WHITE Safety Data Sheet.pdf

Specification

Basis: Cement, aggregates, additives.
Colour: White.
Apparent Density: ~ 1,10 g/cm³.
Maximum Grain Size: 0,3mm.
Flammability: No.
Classification EN 12004-1: C2 TE S1.
Consistency: Creamy.
Wet Density: ~ 1.70 g/cm³.
Mix Ratio:
- Thixotropic: 32% (8 lt water per 25kg bag).
- Flow bed: 38%-40% (9,5 lt - 10 lt water per 25kg bag).
Application Temperature: From + 5°C to + 35°C.
Maximum Thickness: 20mm.
Working Time: ~ 3 hours.
Open Time: ~ 30 minutes.
Time to Foot Traffic: ~ 12 hours.
Time to Grouting: ~ 12 hours.
Time to Full-Service Conditions: ~ 7 days.
Final Hardening: ~ 28 days.
Shelf Life: Factory sealed containers of this product are guaranteed to be of first quality for one (1) year if stored off the ground in a dry area. High humidity will reduce the shelf life of bagged product.

Laticrete 335 Maxi S Multi-Purpose S1 Cement Based Adhesive White 20kg Half Pallet (24 Bags Tail Lift)

£316.51 INC VAT

£263.76 EX VAT

Laticrete 335 Maxi S Multi-Purpose S1 Cement Based Adhesive White 20kg Full Pallet (48 Bags Tail Lift)

£633.02 INC VAT

£527.52 EX VAT